Product Description
SAT*1CS 2M transmission analyzer could test for digital channel of
2M bit/s interface、and digital channel of
V.*4/V.*8/RS**2、V.*5、V.*6、RS**9、X.*1、RS**5、EIA**0、EIA**0A、codirectional
*4kbit/s interface. ◆ Features English menu, large-screen
display, and simple operation; Perform multi-task operation
simultaneously (it could test and browse former record
simultaneously); The test setup memory could be up to 9, and the
test result memory could be up to *0, and it could operate
non-volatile memory; It could communicate with PC, and realize
memory of computer, print out test data, it could also directly
connect to mini printer; It could turn on/off the test regularly;
With alarm and histogram analysis of error code; Software
updating. ◆ Major Functions ·Service-interrupted error code
testing; ·Online error code testing; ·Frame and non-frame
signals generation and reception; ·2 Mbit/s non-frame error code
performance testing; ·2 Mbit/s frame N×*4kbit/s channel error
code performance testing; ·Performance testing of bit error,
coding error, frame error, CRC error and E bit error; ·Testings
of signal loss, AIS alarm, frame remote alarm, multiframe remote
alarm, out-of-frame, and pattern loss alarm; ·Frequency offset
testing; ·Line signal frequency testing; ·Voice channel signal
level and frequency testing; ·Pattern slip testing; ·Clock slip
testing; ·Straight signaling ·Audio frequency testing; ·Loop
delay testing; ·Automatic protection switching time testing;
·Speech monitoring; ·Signal state display. Voice channel content
display. Voice channel busy indication; ·Alarm and error code
histogram analysis ·Time slot content analysis ·Frame content
analysis ·G. **1/G. **6/M. ***0 error code performance analysis
·Several kinds of error code and alarm insertion. ·Three
modes (terminating, bridging and monitoring); ·Three clock
options (internal, and picking-up). ·Print result by RS**2
interface ·Codirectional *4K test ·Data
V.*4/RS**2、V.*5、V.*6、X.*1、RS**9、RS**5、EIA**0、EIA**0A test
Technical index: 2M technical index (1) Signal transmission
rate: ***8kbit/s±**0ppm (G.**3 standard ±**0PPM) (2) Signal code:
HDB3、AMI (3) Input jitter tolerance: accord with request of chart
1.3 Fig.*0.1 Input Jitter Tolerance (4) Input balance
characteristics: the attenuation could accord with square root rule
of frequency, the range of attenuation is 0~6dB at ***4kHz. (5)
Input impedance: (5.1)Non-balanced terminating: *5Ω Balanced
terminating: **0Ω *0Hz~***0kHz reflection loss﹥*8dB
(5.2)Non-balanced bridging: ﹥**0Ω Balanced bridging:***0Ω
(5.3)Non-balanced monitoring: *5Ω *6dB plus Balanced monitoring:
**0Ω *6dB plus *0 Hz~***0kHz reflection loss﹥*8dB (6) Signal
structure: (6.1)Non-frame structure (6.2)Frame structure:
PCM*0、PCM*1、PCM*0CRC、PCM*1CRC frame structure could accord with
G.**4 standards (7) Test
pattern:***1、***1、****1、****1、****1、****1、code (8) Output
interface impedance: (8.1)Non-balanced *5Ω could accord with
G.**3 standards (8.2)Blanced *5Ω could accord with G.**3
standards (9) External clock : (9.1)Signal form: HDB3、NRZ
(9.2)Balanced terminating impedance: **0Ω Non-balanced
terminating impedance: *5Ω Balanced bridging impedance:﹥***0Ω
Non-balanced bridging impedance: ﹥**0Ω (*0) Error code insertion:
none, single, and ratio ***1~***7 ◆ Equidirection *4K technical
index (1) Signal transmission rate: *4kbit/s±**0ppm (G.**3
standards±**0PPM) (2) Input impedance: balanced **0Ω accord with
G.**3 standards (3) Input jitter tolerance: accord with request
of G.**3 (4) Output interface impedance: balanced **0Ω accord
with G.**3 standards (5) Test pattern:
***1、***1、****1、****1、****1、****1、artificial code Data interface
index (1) Data interface type:
V.*4、V.*5、V.*6、X.*1、RS**9、RS**5、EIA***0、EIA***0A (2) Generator
(2.1)SYNCH mode Clock source: Internal or receive clock Phase
relation between clock and data: Equidirection or reverse
direction. Rate:
1.2,2.4,4.8,9.6,*4.4,*9.2,*8.4,*8,*6(kbps);N×*4kbps(N=1~*2)
Error: ±*5ppm(ppm: parts per million) (2.2)ASYNCH mode Rate:
*0,*5,**0,**0,**0,**0,**0,***0,***0,***0,***0,***0,***0;*4.4k,*9.2k,*8.4k,*7.6k(bps)
Data structure: Word length: 5,6,7,8(bits);Stop bit: 1,2(bits);
Odd-even check: odd, even, 1, 0, none (2.3)Error code insertion:
None, single, or ratio ***1 ~ ***7. (3) Receiver (3.1)SYNCH
mode Clock source: Internal or receive clock Phase relation
between clock and data: Equidirection or reverse direction. Clock
rate: ***8 kbps at maximum (3.2)ASYNCH mode: rate and data
structure are same as generator. (4) Test pattern:
***1、***1、****1、****1、****1、****1、artificial code ◆ Other
parameters: Power supply:(1)Special power adapter INPUT:AC**0V
*0Hz OUTPUT:DC 9V 1A (2)Internal rechargeable battery ***0mAh 6V
nickel-hydrogen rechargeable battery Work time: 8 hours Charge: 8
hours at power-off state, and *2 hours at power-on state. Printer
(optional): μP**-TS(CH) 4 Chinese character micro-printer with
standard level and serial port. Dimensions and weight:
L×W×H:**0×**0×*2mm Weight:**0g Ambient parameters: Operation
temperature: 0~*0℃ Storage Temperature: **0~**0℃
Temperature:5%~*0% non-condensing ◆ Distinction between series
products 1、2M error code series(SAT*1AS、SAT*1BS) 2、2M data
series(SAT*1CS、SAT*1DS) Functions & Features SAT*1AS SAT*1BS
SAT*1CS SAT*1DS Power supply AC/DC AC/DC AC/DC AC/DC 2M
offline(service interrupted) √ √ √ √ 2M online(service
uninterrupted) √ √ √ × N×*4K √ √ √ × Loop delay × √ √ × Automatic
protection switching (APS) testing × √ √ × Audio frequency testing
√ √ √ × Sound monitoring One way One way Double- way One way
Straightforward signaling √ √ √ × Equidirectional *4K testing × × √
√ G.**1,G.**6,M.***0 analysis √ √ √ No M.***0 Column diagram
analysis √ √ √ × 2M line level and frequency testing × × √ √ Voice
channel level and frequency testing √ √ √ × Time slot analysis √ √
√ × Frequency deviation testing √ √ √ √ PC connection and software
updating online √ √ √ √ V.*5, V.*4/RS**2, X.*1/V.*1, V*6/RS**9
(SYNCH/ ASYNCH) × × √ √ RS**2/RS**5 EIA**0/EIA**0A (SYNCH, ASYNCH)
× × √ √ Electric power remote monitoring FSK function × × × √ Note:
The items with ”√”indicated means that the items have the functions
described correspondingly, while the items with “×” indicated don’t
have such functions.
Country: |
China |
Model No: |
SAT-1CS
|
FOB Price: |
(Negotiable)
Get Latest Price
|
Place of Origin: |
xi'an |
Price for Minimum Order: |
- |
Minimum Order Quantity: |
1 SET |
Packaging Detail: |
- |
Delivery Time: |
- |
Supplying Ability: |
10000 |
Payment Type: |
- |
Product Group : |
- |